Sheet Metal Hole Punches

Sheet Metal Hole Punches

Don't cut holes in your bodywork with holesaws or step drills, use one of our punches. Why hack when you can punch? The neatest, most professional holes in flat sheet material you can make. To use: Drill a pilot hole for the central bolt. Assemble the punch on both sides of the sheet then tighten the bolt with a hex wrench. A few seconds later you will have a perfect hole with no distortion*. For large 'squoval' apertures punch a hole at each corner and cut the centre out. What's special about ours? We supply them with miniature roller thrust bearings to go under the bolt head and make cutting even easier!

Sort By:
Show:
Display: List Grid
  • 3/8" Imperial Sheet Metal Punch
    Don't cut holes in your bodywork with holesaws or step drills, use one of these. Why hack when you can punch? The neatest, most professional holes in flat sheet material you can make. To use: Drill a pilot hole for the central bolt. Assemble the punch on both sides of the sheet then tighten t..
    £6.69
  • 7/16" Imperial Sheet Metal Punch
    Don't cut holes in your bodywork with holesaws or step drills, use one of these. Why hack when you can punch? The neatest, most professional holes in flat sheet material you can make. To use: Drill a pilot hole for the central bolt. Assemble the punch on both sides of the sheet then tighten t..
    £6.80
  • 1/2" Imperial Sheet Metal Punch
    Don't cut holes in your bodywork with holesaws or step drills, use one of these. Why hack when you can punch? The neatest, most professional holes in flat sheet material you can make. To use: Drill a pilot hole for the central bolt. Assemble the punch on both sides of the sheet then tighten t..
    £7.19
  • 9/16" Imperial Sheet Metal Punch
    Don't cut holes in your bodywork with holesaws or step drills, use one of these. Why hack when you can punch? The neatest, most professional holes in flat sheet material you can make. To use: Drill a pilot hole for the central bolt. Assemble the punch on both sides of the sheet then tighten t..
    £7.69
  • 5/8" Imperial Sheet Metal Punch
    Don't cut holes in your bodywork with holesaws or step drills, use one of these. Why hack when you can punch? The neatest, most professional holes in flat sheet material you can make. To use: Drill a pilot hole for the central bolt. Assemble the punch on both sides of the sheet then tighten t..
    £8.19
  • 11/16" Imperial Sheet Metal Punch
    Don't cut holes in your bodywork with holesaws or step drills, use one of these. Why hack when you can punch? The neatest, most professional holes in flat sheet material you can make. To use: Drill a pilot hole for the central bolt. Assemble the punch on both sides of the sheet then tighten t..
    £8.69
  • 3/4" Imperial Sheet Metal Punch
    Don't cut holes in your bodywork with holesaws or step drills, use one of these. Why hack when you can punch? The neatest, most professional holes in flat sheet material you can make. To use: Drill a pilot hole for the central bolt. Assemble the punch on both sides of the sheet then tighten t..
    £8.80
  • 13/16" Imperial Sheet Metal Punch
    Don't cut holes in your bodywork with holesaws or step drills, use one of these. Why hack when you can punch? The neatest, most professional holes in flat sheet material you can make. To use: Drill a pilot hole for the central bolt. Assemble the punch on both sides of the sheet then tighten t..
    £9.19
  • 7/8" Imperial Sheet Metal Punch
    Don't cut holes in your bodywork with holesaws or step drills, use one of these. Why hack when you can punch? The neatest, most professional holes in flat sheet material you can make. To use: Drill a pilot hole for the central bolt. Assemble the punch on both sides of the sheet then tighten t..
    £9.44