Useful Widgets

Thingamajigs and Gizmos you probably never heard of, but are really useful to have...
 

Sort By:
Show:
Display: List Grid
  • 7/16" Imperial Sheet Metal Punch
    Don't cut holes in your bodywork with holesaws or step drills, use one of these. Why hack when you can punch? The neatest, most professional holes in flat sheet material you can make. To use: Drill a pilot hole for the central bolt. Assemble the punch on both sides of the sheet then tighten t..
    £6.80
  • SHAKE-N-BREAK/AIR HAMMER BUNDLE
    Shake-N-Break is a super quality American made  air impact screw and fastener removal tool. It uses standard, changeable, 5/16" hex insert bits that fit most fasteners and screws in circulation. It slots into a standard air hammer with safety spring and used at low air press..
    £49.99
  • 1/2" Imperial Sheet Metal Punch
    Don't cut holes in your bodywork with holesaws or step drills, use one of these. Why hack when you can punch? The neatest, most professional holes in flat sheet material you can make. To use: Drill a pilot hole for the central bolt. Assemble the punch on both sides of the sheet then tighten t..
    £7.19
  • Battery Hydrometer for testing Electrolyte
    Traditional glass and rubber Hydrometer. Not so easy to come by these days, but useful if your battery is not the sealed type. Could save you the price of a new battery and help diagnose where the problem lays. Open the battery caps, dip in and squeeze the bulb to suck some of the electrolyte int..
    £2.99
  • Paint thickness (and filler finder) gauge
    Paint thickness gauges have several benefits but the professional ones are very expensive. This little bit of electronics is accurate enough to be a good guide, yet cost effective enough for the man in the street or small business to own. Three key uses are: 1) Measuring thickness to highlight..
    £26.99
  • Spare tip set for SHAKE-N-BREAK & other impact drivers
    8mm (5/16") bit set with 6 pieces: 2 off Ph2. 2 off Ph3. 2 off Flat 10mm. Quality hardened bits not auction site monkey metal. ..
    £4.29
  • 9/16" Imperial Sheet Metal Punch
    Don't cut holes in your bodywork with holesaws or step drills, use one of these. Why hack when you can punch? The neatest, most professional holes in flat sheet material you can make. To use: Drill a pilot hole for the central bolt. Assemble the punch on both sides of the sheet then tighten t..
    £7.69
  • 5/8" Imperial Sheet Metal Punch
    Don't cut holes in your bodywork with holesaws or step drills, use one of these. Why hack when you can punch? The neatest, most professional holes in flat sheet material you can make. To use: Drill a pilot hole for the central bolt. Assemble the punch on both sides of the sheet then tighten t..
    £8.19
  • 11/16" Imperial Sheet Metal Punch
    Don't cut holes in your bodywork with holesaws or step drills, use one of these. Why hack when you can punch? The neatest, most professional holes in flat sheet material you can make. To use: Drill a pilot hole for the central bolt. Assemble the punch on both sides of the sheet then tighten t..
    £8.69