THE FAMOUS SHAKE-N-BREAK BACK IN STOCK!
Shake-N-Break is a super quality American made air impact screw and fastener removal tool. It uses standard, changeable, 5/16" hex insert bits that fit most fasteners and screws in circulation. It slots into a standard air hammer w..
Shake-N-Break is a super quality American made air impact screw and fastener removal tool. It uses standard, changeable, 5/16" hex insert bits that fit most fasteners and screws in circulation. It slots into a standard air hammer with safety spring and used at low air press..
There are several 'wonder sockets' on the market for removing seized nuts and bolts and after many failures we came across these American made items. The design is quite simple, the forks inside the socket are driven inwards by cams as you apply force to the socket. That means the harder you..
2.5Litres of our superb penetrating fluid combined with our brass nozzled spray applicator. When you've used it all up just buy a refil of the fluid.
Good stuff that doubles as a moisture repellant for your electrical system etc. Not your domestic diluted penetrant, this is Industrial level p..
We looked for the best penetrating fluid and found it not from the big 'market leader' where its all about saving pennies per can, but from a little company that quietly makes this product for the industrial sector. It is the best we've found and also makes a great moisture dispersant fo..
There are several 'wonder sockets' on the market for removing seized nuts and bolts and after many failures we came across these American made items. The design is quite simple, the forks inside the socket are driven inwards by cams as you apply force to the socket. That means the harder you..
IReOx (pronounced "e-re-ox") is our immersive rust remover. It leaches the rust from steel, even getting into the threads of fasteners so if you are able to immerse the item, such as a suspension arm, drop link etcetera and leave it for a few days, there is no easier solution for freeing r..
Hex recess individual sockets rather than multi-spline because it supports the side of old bolts a lot better, so much less prone to rounding off.
Yes, you can often find a metric one in your toolbox that is close, but you run the risk of rounding off those old bolts when for a few quid you can g..